| Related threads: ( Click here to view ) | ||||
|---|---|---|---|---|
| Thread Topic | Replies | Views | Author | Last Poster |
| LED swaps |
|
|
|
|
| LED gauge swaps in NYC? |
|
|
|
|
| New LED swap |
|
|
|
|
| led swaps |
|
|
|
|
| Interior LED Additions w/ PICS |
|
|
|
|
05-RS1
|
ok i jus got some bulbs today from somebody, but im still waitin for my led's to come in the mail. when they do im just going to swap them out. we'll here's the long and awaited how-to with pics. the only things you will need are two 74 wedge bulbs and a small flathead screwdriver (optional) First, shift to neutral and put on the e-brake. then take the shift knob off. ![]() Next, remove the part of the console that has the cigarette lighter attached to it. just tug on the silver sides and it will pop off. after that remove the cup holder section. same thing, just pull it off. it should look like this. i just left the cigaretty lighter attached to it and moved it to the side but you can unplug it if you want. ![]() ![]() ok now is time for some good 'ol elbow grease. you're gonna have pull from the lower left corner where im pointing to. gently tug and wiggle at the same time you are pulling it up. but be sure to control urself because u may risk breaking something. you should hear a single click first. that means one of the clips are unhooked. it'll make the rest easier to take off since you got some slack now. so after the bottom left corner is loose, continue to take the face plate off from the entire left side and then to the right side. ![]() ![]() Notice the black plastic piece that is still on the shifter. try not to move that around as much as possible because it'll be a pain to re-align with the shift pattern. ok next step. take a look behind the plate and you will see the bulb with a yellow rubber cap over it. it is attacked to a clear plastic piece. BE VERY CAREFUL WITH THIS PLASTIC PIECE! it is very very sensitive and if broken, ur gonna hafta replace it otherwise it wont illuminate the shifter properly. ![]() now, you will have to remove the clear piece from the shifter face in order to get the light out. use your thumb to hold down the clip circled red in the picture. then use a small flat head screw driver to gently lift up the plastic piece. i recommend placing the screw driver next to your thumb holding down the clip. it should lift up real easily. ![]() ![]() now, twist the black plug and remove it from the clear plastic piece. pull the wedge bulb out, replace it with your led. check to see if it turns on. ![]() attach it onto the clear piece and put the clear piece back into the face plate. you will have to slide the top part in first and then press down so that the clip you held with your thumb clicks back on to hold the clear piece snugly to the face plate. you should hear a couple of clicks that the clips make which means the clear piece is securely back on. turn it on again to make sure it still works. ![]() put everything back on in the reverse order that u took off. now remember that black piece that stayed on the shifter? after you put the face plate back on, shift around to see if it is still all lined up. if not you will have to take it off again and re-align it. re-aligning it is basically trial and error. took me about 5 min to re-align cuz i actually took that piece off :doh: ok onto the cubby hole! ok go to the passenger side and pull the carpet out a little bit. there will be one clip that you will have to unclip to get enough room to work with ![]() now, feel for the cubby and find the plug that has the cubby light on it. twist it then wiggle and pull at the same time to get it out. ![]() now, same as the shifter bulb, pull out the wedge bulb and replace it with the led. again, turn it on to see that its working ![]() put it back in the reverse order. stuff the carpet back in and dont forget to put the clip back on. turn it on again... ![]() and your done! enjoy the finished product! it is much brighter in person and even brighter if its led. like i said im still waiting for mine to come in so these are regular bulbs in there right now. |
|
|
|
raw
|
that looks awesome if they have blue lights im going to put them in, good post |
|
|
|
guitarguru44
|
nice.. imk sure it looks nice with the 1.0 red :mrgreen: |
|
|
|
raw
|
Where can i get LEDs for this, or let alone any colored light thats 74 wedge i went everyone pep boys, autozone, autorecon, dynamic autosport, dealerships, repair shops, no joke everywhere... Whered you get yors? |
|
|
|
shystieone
|
SWEEET!! |
|
|
|
2006TcScion
|
Hey where did you get the leds. |
|
|
|
aj2k3
|
Hey, I've been trying to find these darn LED's and I can't find them anywhere. I can't order offline cuz I have no paypal nor credit card. Also, where did you get the 74 wedge bulbs at? THANKS! |
|
|
|
05-RS1
|
damn i made this thread so long ago and it only gets responses now lol. well i bought them from superbrightleds.com. i'm not sure which store you can buy it from..i went to a carquest and they had 74 wedge bulbs but it was only the regular replacement bulbs, not different colors. |
|
|
|
Aciidsneaker
|
Looks awesome, just ordered some blue LED's since my shifter light has been burnt out for a couple weeks now. I hope this light will work please let me know it was hard to find a #74 bulb not sure if this is right. if not I'll have to sell it on ebay. ![]() ![]() Scion Wiki ~~ |
|
|
|
MrScion07
|
Aciidsneaker u have a auto ![]() |
|
|
|
MrScion07
|
or are u talkin about in the cubby hole idk what type of bulb there is in there but if it dosent work u should beable to put it in one of the dome lights in the front ![]() |
|
|
|
Aciidsneaker
|
Yea, unfortunately as much as I would have really loved to have a manual ![]() ![]() Scion Wiki ~~ |
|
|
|
Aciidsneaker
|
Here are two sites to get good LED light's. Super Bright LEDS Auto Lumination ![]() ![]() Scion Wiki ~~ |
|
|
|
MrScion07
|
yeah the other day i relaced all my interior dome lights to LEDS from super bright LEDs i did the back dome and the front dome that comes on when the door opens blue and the 2 that u turn on when its too dark and u need to find something white really nice compaired to the dull ones that were in there i poped the 7.5 fuse that was in there so i replaced it with a 10 and that worked out nice looks real good i should of done the cubby hole too but i didnt think of it durrrrrr i was gunna do a DIY of it but its really just a self explaining type of job pop the lenses off and replace ![]() |
|
|
|
BlackTC185
|
Awesome DIY, everything worked perfect for me. Now I have every interior light in the car replaced with white LED's. Got em all from superbrightleds.com. Cheap shipping, cheap prices. You've got a date rapist face. |
|
|
|
grlswannadance
|
OHH! im gonna see if i can find pink a car is a girls toy too ;] -- www.myspace.com/pinksquadowner --www.itsmyscion.com/caligirltiffy |
|
|
|
xLOx89x
|
if u find some let me know please! |
|
|
|
grlswannadance
|
^^ fo sho! a car is a girls toy too ;] -- www.myspace.com/pinksquadowner --www.itsmyscion.com/caligirltiffy |
|
|
|
racing-imports
|
My P and L are dimmer than the rest for some reason... Anyone know why? Or is that the way its supposed to be... |
|
|
|
VIP_tC08
|
i just did mine, and i also have this same issue..i think it might be because the LED light is more concentrated on the center section...its still very bright. im happy ![]() 2008 // Flint Mica // tC |
|
|
|
racing-imports
|
Who knows. Yeah, def still pretty cool tho :) |
|
|
|
tC_vixen
|
Nice DIY. So this changes my shifter light and the lights on the sides? ![]() CLICK TO DONATE & HELP MAKE THIS WONDERFUL SITE OF OURS BETTER! |
|
|
|
BatmansTC
|
I believe it changes the shifter light and that gap you have under the hvac. ![]() "She said its just a car...and i said your just a girl!! " |
|
|
|
VIP_tC08
|
yes nadia and here's a pic of mine ![]() ![]() 2008 // Flint Mica // tC |
|
|
|
tC_vixen
|
Ohhhhh.. I see it now.. Thanks Raul. ![]() CLICK TO DONATE & HELP MAKE THIS WONDERFUL SITE OF OURS BETTER! |
|
|
|